Configuring Privacy Mask; Figure 4-13 Privacy Mask - Honeywell 60 Series Configuration Manual

Honeywell 60 Series IP Camera Software Configuration Guide
By default, the optimal focus is found on a full view window. You may designate a custom
window within your current field of view to acquire the best focus out of it. However, you
cannot place a focus window on a distant background, e.g., a hall way that stretches away for
3 meters or farther. Doing so you will not benefit from the Focus window function.
•
Full view: The focus tuning takes place by referring to the full view.
•
Custom: You can create a focus window and drag it to a place of interest in your view
window.
It is recommended that this function be used only when you have a
solid object in your view window that is showing a consistent color or
Note
texture. This function will not take effect if you set the focus window
on a distant background.

Configuring Privacy Mask

On this page, you can block out sensitive view areas to address privacy concerns.
Go to Setup Camera Setup  Privacy Mask.
To configure privacy masks for Non-PTZ models:
1. Click NEW to add a new privacy mask window on the video screen.
2. Use 4 mouse clicks to create a new masking window, which is recommended to be at least
twice the size of the object (height and width) you want to cover.
3. Enter a name for the privacy mask and click SAVE to enable the setting.
4. Check Enable privacy mask to enable this function.

Figure 4-13 Privacy Mask

34