Special Presets; Table 3-1 Special Presets - Honeywell ACUIX User Manual

Preparing to Configure the Dome

Special Presets

Preset Function
72 Recover encrypted user login
73 Enable broadcast command receive mode
74 Disable broadcast command receive mode
75 Administrator/password/PIN settings:
• User login PIN
• Change PIN
• System info
• Change address, protocol
76 Run mimic tour 1–16
77 Program mimic tour
78 Run preset tour 1–16
79 User default setting preset
80, 81, 82 Run mimic tours 1, 2, and 3
83, 84, 85 Program mimic tours 1, 2, and 3
86 End mimic tour programming mode
87, 88, 89 Start/run preset tours 1, 2 and 3
90 Setup menu (OSD)
91 Reserved
92 Toggle auto exposure on or off
93 Toggle backlight compensation on or off
94 Toggle between day mode and night mode
95 Toggle between freezing and unfreezing the current scene
96 Run flashback function (toggle between two saved positions)
97 Advanced preset
98 Camera reset
99 Toggle between day mode and night mode
a
Camera model dependent
14
Special presets 72 to 99 are reserved for controlling and programming the dome.
Table 3-1

Special Presets

a
Protocol
Diamond, IntelliBus™, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
Diamond, MAXPRO-mode, VCL,
VCL UTC, Pelco P, Pelco D, AD
Diamond, IntelliBus™, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD
All
MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD, Pelco P_AD,
Pelco D_AD
MAXPRO-mode, VCL, VCL UTC, Pelco P,
Pelco D, AD
MAXPRO-mode, VCL, VCL UTC,
Pelco P, Pelco D, AD, Pelco P_AD,
Pelco D_AD
MAXPRO-mode, VCL, VCL UTC, Pelco P,
Pelco D, AD
MAXPRO-mode, VCL, VCL UTC, Pelco P,
a
Pelco D, AD
a
All
Diamond, IntelliBus, MAXPRO-mode,
VCL, VCL UTC, Pelco P, Pelco D, AD
a
Diamond, IntelliBus