Configuring Host/Loop Communications; Setting Communication Parameters For Win-Pak - Honeywell MPA2C3 User Manual

•
•
•
Panel-specific data includes:
•
•
•
•
•
•
•
•

Configuring Host/Loop Communications

To maintain your MPA2C3 system configuration or to monitor its status, you must
connect to the panel using one of three modes:
•
•

Setting Communication Parameters for WIN-PAK

1. Navigate to Host/Loop Communications:
2. Click to select WIN-PAK.
36
Holidays
Access Group Name (access group details are panel-specific)
Configuration (Site Codes)
Access Group Schedule Reader Assignments
Space/Door/Reader Configuration
Panel Configuration (General)
Panel Configuration (Firmware Version)
Panel Configuration (Network) (IP addresses apply only to primary panel)
Panel Configuration (Host/Loop Communications) (applies only to primary
panel)
Panel Configuration (FACP input)
Web Users (applies only to primary panel)
Host mode (monitor only) – a host software system, such as WIN-PAK™ or
MAXPRO Cloud, connects to the panel (through the primary panel, which has an
on-board PCI communications adapter). It enables you to monitor the system
status.
Web mode (configure and monitor) – the web server connects to the panel and
enables you to configure the panel and monitor system status.
• Dashboard > Panels > Host/Loop Communications, or
• Menu > Panel Configuration > Host/Loop Communications.
MPA2C3 User Manual