Configuring Doors; Accessing The Doors Configurations - Honeywell MPA2C3 User Manual

Figure 2-20
5. Click Save

Configuring Doors

Each panel supports from 1-4 doors depending on the license applied on the
panel. For each door, you must configure the readers, inputs, and outputs.
MPA2C3 supports:
•
•
Note: You must assign doors to a Space before you can configure the doors. See
Spaces on pageXXXXXX

Accessing the Doors Configurations

1. Navigate to the Configure your Spaces tab by doing one of the following:
•
•
Figure 2-21
MPA2C3 User Manual
2 Door Controller: Each door can be controlled by 2 Wiegand readers (Reader A: IN / READER
B: OUT) or by 2 OSDP readers (IN and OUT).
4 Door Controller: Each door can be controlled by 1 Wiegand reader (Reader A:
IN) or by 2 OSDP readers (IN and OUT)
Click Menu > Configuration, or
Click Spaces in the Dashboard.
Configure your Spaces Tab
Door Controller
Configuring
53