Modifying A Person - Honeywell MPA2C3 User Manual

4. Or click Add near the bottom of the window to assign a card from an available
5. Enter a PIN (numbers only).
6. Optional: Enter a note, such as Department number, phone extension, or a
7. Turn Trace on or off.
8.
9. Select a type of Usage.
10. If you select Temporary, then you must select an end date on the calendar.
11. If you select Limited, then you must select the maximum number of times the
12. Select an Access Type: Employee, Supervisor, or VIP. See
13. Click Save.
Tip: You can assign attributes from an existing set of cards.
window, click

Modifying a Person

1. Click the box next to the person's name.
Figure 2-41 Modifying a Person
2. Make changes to the person, then click Save.
MPA2C3 User Manual
set of cards.
birthday, for example. Notes can be up to 20 characters.
Trace provides a record of the card holder's path through the facility by sending an alarm
message to the alarm monitor whenever a card with trace enabled is presented at a reader.
card can be presented.
section on page
Functionality
Add
to open a list of available cards, then select a card to assign to this person.
for more about Access Types.
123
User Access Types and
People & Cards
At the bottom of the
83