Usb Communications - Honeywell MPA2 Installation Manual

3.7 Communications

3.7.1 USB Communications

The MPA2 Controller Board provides a version 2.0 USB port that connects
to the web browser or to a MPC/WIN-PAK. The following figure identifies
the location of the port on the board.
USB communication requires the USB A to MicroUSB B cable.
Note:
You will need to install a USB driver to support the connection. Follow these
steps:
1. Insert the MPA2 Product CD into your Windows-based computer.
MPA2 Access Control Unit Installation Guide, Document 800-25395 - B
Do NOT connect the USB cable to the panel until AFTER the
Warning:
drivers are installed.
The MPA2 product menu opens in the web browser.
: If the product menu does not open automatically in your browser,
Note
right click on the button and select
Start
click the CD drive that is reading the MPA2 Product CD.
Installing the MPA2 Panels
. In the folder tree, find and
Explore
Installation
41