Adding A New Card - Honeywell MPA2C3 User Manual

Adding a New Card

1. Click
Figure 2-44 Adding New Cards
2. Enter either a card number (if adding a single card) or a range (if adding
3. Enter a PIN if you're adding a single card. See the note on
Note: A PIN is optional; however, if the door reader is configured to require PIN
identification (see
for the card holder here. The PIN has a maximum of six digits.
Note: If you are adding multiple cards, then you cannot enter a PIN/Password.
4. Turn Trace on or off.
5. Select a type of Usage.
86
in the Cards tab of the People & Cards window to open the configu-
ration options.
multiple cards).
rules.
Configuring Door Reader Settings on page 47
Trace provides a record of the person's path through the facility by sending an alarm message to
the Alarm & Events screen
a. If you select Temporary, then you must select from the calendar an end
date for the temporary card.
b. If you select Limited, then you must enter the maximum number of
accesses granted to the temporary card, between 1 to 255.
whenever a card with trace enabled is presented at a reader.
for PIN number
page 83
), then you must create a PIN
MPA2C3 User Manual