About Supervisor Mode - Honeywell MPA2C3 User Manual

Access control unit
Hide thumbs Also See for MPA2C3:
Table of Contents

Advertisement

Figure 2-26 Door Configurations - Wiegand Mode
1. Enter a Door Name.
2. Select a schedule for the following settings:
Note: The order of the above list is the priority order.
3. Select an Access Type, if desired, either SUPERVISOR or ESCORT, for Card and
Note: Access Type selection is optional.

About Supervisor Mode

Supervisor mode enables a supervisor to enter without allowing general access.
When this mode is enabled, the reader LED changes color four times per second
(usually red then
MPA2C3 User Manual
Disable Reader
Lockdown Reader
Card and PIN
Card or PIN
PIN only
Card Only
PIN, Card or PIN, PIN only, and Card only.
green).
57

Advertisement

Table of Contents
loading

Table of Contents