Facp Input Prerequisites - Honeywell MPA2C3 User Manual

Access control unit
Hide thumbs Also See for MPA2C3:
Table of Contents

Advertisement

APPLICATION /
USE CASE
Other System Prerequisites

FACP input prerequisites

The MPA2C3 has a dedicated fully hardware controlled FACP (Fire Alarm Control
Panel) input. When triggered the panel overrides immediately and simultaneously
the 4 door outputs (OUT1, OUT3 (AUX1), OUT2, OUT4 (AUX2)) to a Fail-safe state
(door unlocked state*). AUX REL 5,6,7 and 8 are NOT affected hardware wise by
the FACP input. See the installation manual for FACP installation.
Note: Individual doors cannot be selected to be fail-safe or fail-secure. All door outputs are
affected.
When the FACP input is activated:
To achieve the above functionality the panel needs to be set to the Reversed Door
Access Mode. In Reversed Door Access Mode the Door Outputs (OUT1, OUT3
(AUX1), OUT2, OUT4 (AUX2)) are reversed.
In Reversed Door Access Mode all Door Relays (OUT1, OUT3 (AUX1), OUT2, OUT4
(AUX2)) are energized when the doors are supposed to be locked. To unlock a door
the Door relay must be in de-energized state.
Always test the full end to end functionality of the FACP input and the effect to the
doors (not only the outputs) after the installation has been completed.
110
Fail-Secure Access Control w/ door
strikes
- At power loss doors will lock,
- For all doors not requiring evacuation
mode
Use Power-to-lock Door locking
devices, such as door strikes
All door outputs (OUT1, OUT3 (AUX1), OUT2, OUT4 (AUX2)) are in safe condition
(safe = off = unlocked door* = free egress).
None of the door outputs (OUT1, OUT3 (AUX1), OUT2, OUT4 (AUX2)) can be
controlled by card readers, egress buttons or access control software.
There is a notification in the Web UI that the FACP input has been activated. Host
software will be notified.
FACP input not activated: Doors 1 to 2/4 function as access-controlled doors,
using cards, egress or software/Web User Interface.
Fail-Safe Access Control w/ mag
locks:
- At power loss doors will unlock,
- For inner doors, corridor doors,
- Where escape route needed
- First responders to easily enter
Use Power-to-Unlock Door locking
devices, such as magnetic locks
MPA2C3 User Manual

Advertisement

Table of Contents
loading

Table of Contents