Honeywell MPA2C3 User Manual page 111

4. Remove the jumperhead from the FACP jumper.
Note: The amber FACP LED (in use) will not turn on automatically when the FACP jumper
has been removed.
MPA2C3 User Manual
a. Set the Jumperhead to the Red
Access Mode)
b. This is the correct setting to connect power-to-lock locking devices (such as
magnetic locks) to the output.
Hardware activate the FACP input on the panel and unbypass the FACP input.
R-NC (Normally Closed in Reversed Door
113