3. Click Install to initiate the installation. When the installation is complete, the
4. Click Finish.
5. Connect the computer to the MPA2C3 controller USB2 - WEB MODE connector
6. Supply power to the MPA2 controller. Login at https://192.168.2.150.
Setting Up an Ethernet Port
There are two options for connecting the panel to a PC via a web server via the
Ethernet port Eth1 / PoE+ - HOST:
•
•
MPA2C3 User Manual
closing screen appears:
with a Type-C USB cable.
Using a Switch /LAN connection
Using a direct connection
17