Configuring Host/Loop Communications - Honeywell MPA1 User Manual

24 |
MPA1 User Guide

Configuring Host/Loop Communications

To maintain your MPA1 system configuration or to monitor its status, you must connect to
the panel using one of three modes:
•
•
Setting Communication Parameters for Host Mode
1.
2.
www.honeywell.com/security
Host mode (monitor only) – a host software system, such as WIN-PAK™ or MAXPRO Cloud,
connects to the panel (through the primary panel, which has an on-board PCI communications
adapter). It enables you to monitor the system status.
Web mode (configure and monitor) – the web server connects to the panel and enables you to
configure the panel and monitor system status.
Navigate to Host/Loop Communications:
• Dashboard > Panels > Host/Loop Communications, or
• Menu > Panel Configuration > Host/Loop Communications.
Click to select WIN-PAK.
Figure 2-6 Selecting WIN-PAK on the Host/Loop Communications Tab