Creating Interlocks - Honeywell MPA2C3 User Manual

Creating Interlocks

1. Click
Figure 2-36 Create Interlocks Interface
2. Enter a name for the new Interlock.
3. Select configurations for the Triggers (Input, Output, or Group), Reaction
Table 2-15
Configuration
Triggers
78
to open the Create Interlock window.
(Input, Output, or Group), Alarm Action, and Normalcy (the state to which the
trigger returns).
Description
Specifies the input, output, or output group for which a change of state will cause a
reaction from another input, output, or group.
Trigger = Inputs
If
from 1-96.
Trigger = Outputs
If
number from 97-184.
If Trigger = Group
from 185-250.
Use the drop-down list to specify the number of the input or output.
Additional Input/Output/Group points are achieved with the addition of NX4IN and
NX4OUT secondary devices.
, then triggers 1-88* will have an interlock link (Int Lnk) number
, then outputs 1-80* will have an interlock link (Int Lnk)
s, then groups 1-64* will have an interlock link (Int Lnk) number
MPA2C3 User Manual