Upload (From Panel); Backing Up (Or Uploading) Other Data From The Panel To The Host System; Card Report; Diagnostic Report - Honeywell MPA2C3 User Manual

Upload (From Panel)

I. Primary Panel Upload
From the primary panel's UPLOAD menu under File Management tab, it will list fol-
lowing three options from drop-down list to upload from Panel,
•
•
•
II. Secondary Panel Upload
From any secondary panel's UPLOAD menu, it will list following two options from
drop-down list,
•
•
Backing Up (or Uploading) Other Data from the Panel to
the Host System

Card Report

Uploads the Card Number, Last Name, First Name, Trace, VIP, Limited Use, Card
Expiration, Temporary, Supervisor, Access Groups, Site Codes, Number of Bits, Pin,
Info 1, Info 2, Schedules, Activation Date, Issue Level, APB State, and Control
Device card values in a .CSV file.
Note: Card report (short and long) data is stored in a 64-bit format. Microsoft Excel displays
up to 32 characters. Therefore, you should save the report and then open it in
Notepad, instead of opening the report immediately in the default .CSV format in
Excel.

Diagnostic Report

Troubleshooting information can be retrieved from the panel using this function.
The report is not readable to the customer and is useful only as a tool to help Hon-
eywell technical support troubleshoot certain unusual problems.
To generate a diagnostic report,
1. Select "Diagnostic Report" from the Upload drop-down menu on File Manage-
2. Click Upload button.
122
Diagnostic Report
Card Report
System-wide Backup
Diagnostic Report
Card Report
ment screen.
MPA2C3 User Manual