Rear Sockets Access; The Ex60 Parts; Connecting - Cisco EX60 User Manual

Cisco Telepresence System EX60
Connecting the EX60
Connect the cables as shown. Sockets are located behind the rear cover. If you have
one LAN connection only—and need that for your PC—the EX60 has a built in Gigabit
ethernet switch that enables you to connect your PC to the EX60 to access the LAN
through the EX60.

Rear sockets access

Remove cover to get access to the connector sockets.
User guide EX60, November 2010.
D14779.01
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
All manuals and user guides at all-guides.com
Bend gently
upwards where
the arrows
indicate and then
pull out the lid.
Sockets
Connect
headphones
and external
microphone here.

The EX60 parts

Camera with built-in privacy shutter.
The Cisco
Telepresence touch
screen controller

Connecting

 

Connect power here.

Connect your PC here if you need to share a single LAN connection with the EX60.

Connect your EX60 to the LAN.

Connect the touch screen controller.

DVI socket to use the EX60 as a PC screen.

Mini-jack socket for PC audio.

For service and maintenance.
6
   
www.cisco.com
User guide