Cisco 7800 Series Administration Manual page 82

Secure the Phone with a Cable Lock
Secure the Phone with a Cable Lock
You can secure your phone with a laptop cable lock up to 20 mm wide.
Procedure
Step 1 Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.
Step 2 Pass the lock through the looped end of the cable.
Step 3
Unlock the cable lock.
Step 4 Press and hold the locking button to align the locking teeth.
Step 5 Insert the cable lock into the lock slot of your phone and release the locking button.
Step 6 Lock the cable lock.
External Speakers and Microphone
External speakers and microphones are plug-and-play accessories. You can connect an external PC-type
microphone and powered speakers (with amplifier) on the Cisco IP Phone by using the line in/out jacks.
Connecting an external microphone disables the internal microphone and connecting an external speaker
disables the internal phone speaker.
Using poor quality external audio devices, playing loudspeakers at very loud volumes, or placing the
Note
microphone very close to the loudspeaker may result in undesirable echo for other parties on your
speakerphone calls.
Connect the Footstand (7800)
If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Procedure
Step 1
Insert the curved connectors into the lower slots.
Step 2 Lift the footstand until the connectors snap into the upper slots.
You may need to exert more force than you expect to connect or disconnect the footstand.
Step 3
Adjust the angle of the phone.
Note
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
68
You cannot adjust the Cisco IP Phone 7811 footstand.