Cisco 7800 Series Administration Manual page 174

Cisco IP Phone Web Page
LCD
Parameter
LCD Contrast
Back Light Timer (seconds)
Extension
In a configuration profile, the Line parameters must be appended with the appropriate numeral to indicate the
line to which the setting applies. For example:
[1] to specify line one
[2] to specify line two
General
Parameter
Line Enable
Server Type
Share Line Appearance
Parameter
Share Ext
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
160
Description
Enter a number value from 1 to 30. The higher the number, the greater
the contrast on the IP phone screen.
Default: 16
Select the number of seconds before the back light should turn off (10s,
20s, or 30s) or Off or Always On.
7811 Cisco IP Phone does not support Back Light
Note
Timer
Default: 30s
Description
To enable this line for service, select yes. Otherwise, select No.
Default: Yes
Choose the server type:
• Broadsoft
• Metaswitch
• Asterisk
• Other
Description
Indicates whether this extension is to be shared with other Cisco IP
phones or private.
Default: Yes