Cisco 7800 Series Administration Manual page 177

Parameter
Refer-To Target Contact
SIP Debug Option
Sticky 183
Auth INVITE
User Equal Phone
Call Feature Settings
Parameter
Message Waiting
Default Ring
Conference Bridge URL
Voice Mail Server
Voice Mail Subscribe Interval
Description
Indicates the refer-to target. Select Yes to send the SIP Refer to the
contact.
Default: No
How SIP messages are received at or sent from the proxy listen port to
the log. Select:
• Default—No messages.
• Current—Logs all the current SIP messages in full text.
• Full—Logs all SIP messages in full text.
When enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable
this feature, select Yes. Otherwise, select No.
Default: No
When enabled, authorization is required for initial incoming INVITE
requests from the SIP proxy. To enable this feature, select Yes.
Default: No
When a tel URL is converted to a SIP URL and the phone number is
represented by the user portion of the URL, the SIP URL includes the
optional : user=phone parameter (RFC3261). For example:
To: sip:+12325551234@example.com; user=phone
To enable this optional parameter, select Yes.
Default: No
Description
Indicates whether the Message Waiting Indicator on the phone is lit.
This parameter toggles a message from the SIP proxy to indicate if a
message is waiting.
Type of ring heard. Choose from No Ring or 1 through 10.
URL used to join into a conference call, generally in the form of the
word conference or user@IPaddress:port.
Identifies the SpecVM server for the phone, generally the IP address,
and port number of the VM server.
The expiration time, in seconds, of a subscription to a voice mail server.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Web Page
163