Cisco 7800 Series Administration Manual page 140

Cisco IP Phone Web Page
Parameter
VID
Client Certificate
Phone Status
Parameter
Current Time
Elapsed Time
Operational VLAN ID
SW Port
Call Status
Ext Status
Parameter
Registration State
Last Registration At
Next Registration In
Mapped SIP Port
Line 1 Status/Call 2 Status
Each line and call on the phone display with the following parameters.
Parameter
Call State
Duration
Remote Address
Local Address
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
126
Description
Device version ID of the phone, associated with PID.
Status of the client certificate, which authenticates the Cisco IP Phone
for use in the ITSP network. This field indicates if the client certificate
is properly installed in the phone.
Description
Current date and time of the system; for example, 08/06/14 1:42:56 a.m.
Total time elapsed since the last reboot of the system; for example, 7
days, 02:13:02.
ID of the VLAN currently in use if applicable.
Displays the type of Ethernet connection from the IP phone to the switch.
Description
Shows "Registered" if the phone is registered, or "Not Registered" if the
phone is not registered to the ITSP.
Last date and time the line was registered.
Number of seconds before the next registration renewal.
Port number of the SIP port mapped by NAT.
Description
Status of the call.
Duration of the call.
Address of the remote device.
Address of the local device.