Cisco 7800 Series Administration Manual page 105

Procedure
Step 1 Click Admin Login > advanced > Voice > Phone.
Step 2 In the Miscellaneous Line Key Settings section, use the Call Appearances Per Line drop-down list box to
specify the number of calls per line to allow.
Step 3 Click Submit All Changes.
Call Features Configuration
Enable Call Transfer
Procedure
Step 1
Click Admin Login > advanced > Voice > Phone.
Step 2 Under Supplementary Services, choose Yes for each of the transfer services that you want to enable:
• Attn Transfer Serv—Attended call transfer service. The user answers the call before transferring it.
• Blind Transfer Serv—Blind call transfer service. The user transfers the call without speaking to the
Step 3 To disable a transfer service, set the field to No.
Step 4 Click Submit All Changes.
Enable Call Forwarding
Procedure
Step 1 Click Admin Login > advanced > Voice > Phone.
Step 2 Under Supplementary Services, choose Yes for each of the call forwarding services that you want to enable:
• Cfwd All Serv—Forwards all calls.
• Cfwd Busy Serv—Forwards calls only if the line is busy.
• Cfwd No Ans Serv—Forwards calls only if the line is not answered.
Step 3
Click Submit All Changes.
caller.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Call Features Configuration
91