Cisco 7800 Series Administration Manual page 169

Parameter
LDAP Corp Dir Name
LDAP Server
LDAP Auth Method
LDAP Client DN
LDAP Username
LDAP Password
LDAP Search Base
Description
Enter a free-form text name, such as "Corporate Directory."
Default: Blank
Enter a fully qualified domain name or IP address of LDAP server, in
the following format:
nnn.nnn.nnn.nnn
Enter the host name of the LDAP server if the MD5 authentication
method is used.
Default: Blank
Select the authentication method that the LDAP server requires. Choices
are:
None—No authentication is used between the client and the server.
Simple—The client sends its fully-qualified domain name and password
to the LDAP server. Might present security issues.
Digest-MD5—The LDAP server sends authentication options and a
token to the client. The client returns an encrypted response that is
decrypted and verified by the server.
Default: None
Enter the distinguished name domain components [dc]; for example:
dc=cv2bu,dc=com
If using the default Active Directory schema
(Name(cn)->Users->Domain), an example of the client DN follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
Default: Blank
Enter the username for a credentialed user on the LDAP server.
Default: Blank
Enter the password for the LDAP username.
Default: Blank
Specify a starting point in the directory tree from which to search.
Separate domain components [dc] with a comma. For example:
dc=cv2bu,dc=com
Default: Blank
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Web Page
155