Cisco 7800 Series Administration Manual page 75

Third-Party Call Control Setup
•
•
•
•
•
Determine the Phone MAC Address
To add phones to the Cisco Third-Party Call Control system, determine the MAC address of a Cisco IP Phone.
Perform one of the following actions:
• On the phone, press Applications > Phone Information, and look at the MAC Address field.
• Look at the MAC label on the back of the phone.
• Display the web page for the phone and select Info > System Status > Product Information.
Network Configuration
The Cisco IP Phone is used as a part of a SIP network, because the phone supports Session Initiation Protocol
(SIP). The Cisco IP Phone is compatible with other SIP IP PBX call control systems, such as BroadSoft,
MetaSwitch, and Asterisk.
Configuration of these systems is not described in this document. For more information, see the documentation
for the SIP PBX system to which you are connecting the Cisco IP Phone.
This document describes some common network configurations; however, your configuration can vary,
depending on the type of equipment that your service provider uses.
Determine the Phone MAC Address, page 61
Network Configuration, page 61
Provisioning, page 62
Web-Based Configuration Utility, page 62
Administrator and User Accounts, page 63
C H A P T E R
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
4
61