Cisco 7800 Series Administration Manual page 162

Cisco IP Phone Web Page
Parameter
Interdigit Short Timer
Vertical Service Activation Codes
Parameter
Call Back Act Code
Call Back Deact Code
Block CID Act Code
Block CID Deact Code
Block ANC Act Code
Block ANC Deact Code
Time
Parameter
Set Local Date (mm/dd/yyyy)
Set Local Time (HH/mm)
Time Zone
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
148
Description
Short timeout between entering digits when dialing. The
Interdigit_Short_Timer is used after any one digit, if at least one
matching sequence is complete as dialed, but more dialed digits would
match other as yet incomplete sequences. Range: 0–64 seconds.
Default: 3
Description
Activation code for Call Back
Default: *66
Deactivation code for Call Back
Default: *86
Blocks caller ID on all outbound calls
Default: *67
Removes caller ID blocking on all outbound calls.
Default: *68
Blocks all anonymous calls.
Default: *77
Removes blocking of all anonymous calls.
Default: *87
Description
Sets the local date (mm represents the month and dd represents the day).
The year is optional and uses two or four digits.
Default: Blank
Sets the local time (hh represents hours and mm represents minutes).
Seconds are optional.
Default: Blank
Selects the number of hours to add to GMT to generate the local time
for caller ID generation. Choices are GMT-12:00, GMT-11:00,..., GMT,
GMT+01:00, GMT+02:00, ..., GMT+13:00.
Default: GMT-08:00