Cisco 7800 Series Administration Manual page 121

Keyword Key Label
bxfer BlindXfer/bxfer
cancel Cancel
cfwd Forward
clear Clear
conf Conf
confLx Conf Line
delchar delChar
dial Dial
dir Dir
dnd DND
endcall End Call
hold Hold
ignore Ignore
Definition
Performs a blind call transfer
(transfers a call without speaking to
the party to whom the call is
transferred). Requires that Blind Xfer
Serv is enabled.
Cancels a call (for example, when
conferencing a call and the second
party is not answering).
Forwards all calls to a specified
number.
Clears an entire text/number field.
Initiates a conference call. Requires
that Conf Serv is enabled and there
are two or more calls that are active
or on hold.
Conferences active lines on the
phone. Requires that Conf Serv is
enabled and there are two or more
calls that are active or on hold.
Deletes a character when entering
text.
Dials a number.
Provides access to phone directories.
Sets Do Not Disturb to prevent calls
from ringing the phone.
Ends a call.
Put a call on hold.
Ignores an incoming call.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Programmable Softkeys
Available Phone States
Connected, Connected
Dialing Input
Idle, Off-Hook, Hold,
Shared-Active,
Shared-Held
Input
Connected, Start-Conf
Connected
Dialing (input)
Dialing (input)
Idle, Connected,
Start-Conf, Start-Xfer,
Off-Hook (no input),
Redial
Idle, Off-Hook (no input),
Hold, Shared-Active,
Shared-Held
Connected, Off-hook,
Progressing, Start-Xfer,
Start-Conf, Conferencing,
Releasing, Resume
Connected, Start-Xfer,
Start-Conf, Conferencing
Ringing
107