Cisco 7800 Series Administration Manual page 135

Procedure
Step 1
Press Applications
Step 2 Select Admin Settings > Status > Network Statistics.
Step 3 To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear.
Step 4
To exit the Network Statistics screen, press Back .
Network Statistics Fields
The following table describes the information in the Network Statistics screen.
Table 10: Network Statistics Fields
Item
Tx Frames
Tx Broadcasts
Tx Unicast
Rx Frames
Rx Broadcasts
Rx Unicast
CDP Neighbor Device ID:
• CDP Neighbor IP Address
• CDP Neighbor Port
Restart Cause: One of these values:
• Hardware Reset (Power-on reset)
• Software Reset (memory controller
also reset)
• Software Reset (memory controller
not reset)
• Watchdog Reset
• Unknown
.
Description
Number of packets sent by the phone
Number of broadcast packets sent by the phone
Total number of unicast packets transmitted by the phone
Number of packets received by the phone
Number of broadcast packets received by the phone
Total number of unicast packets received by the phone
Identifier of a device connected to this port discovered by CDP
protocol.
Cause of the last reset of the phone
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Status
121