Cisco 7800 Series Administration Manual page 144

Cisco IP Phone Web Page
Parameter
Custom CA Info
Custom CA certificates are configured in the Provisioning tab. For more information about custom CA
certificates, see the Cisco IP Phone 7800 Series and 8800 Series for Third-Party Call Control Provisioning
Guide.
Network Statistics
Ethernet Information
Parameter
TxFrames
TxBroadcasts
TxMulticasts
TxUnicasts
RxFrames
RxBroadcasts
RxMulticasts
RxUnicasts
RxPacketNoDes
Network and Access Port Information
Parameter
RxtotalPkt
RxcrcErr
RxalignErr
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
130
Description
Displays information about the custom CA:
• Installed—Displays the "CN Value," where "CN Value" is the
value of the CN parameter for the Subject field in the first
certificate.
• Not Installed—Displays if no custom CA certificate is installed.
Description
Total number of packets that the phone transmitted.
Total number of broadcast packets that the phone transmitted.
Total number of multicast packets that the phone transmitted.
Total number of unicast packets that the phone transmitted.
Total number of packets received by the phone.
Total number of broadcast packets that the phone received.
Total number of multicast packets that the phone received.
Total number of unicast packets that the phone received.
Total number of shed packets that the no Direct Memory Access (DMA)
descriptor causes.
Description
Total number of packets that the phone received.
Total number of packets that were received with CRC failed.
Total number of packets between 64 and 1522 bytes in length that were
received and that had a bad Frame Check Sequence (FCS).