Cisco 7800 Series Administration Manual page 167

Miscellaneous Line Key Settings
Parameter
Line ID Mapping
SCA Barge-In-Enable
Call Appearances Per Line
Supplementary Services
Parameter
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND Serv
Block ANC Serv
Call Back Serv
Block CID Serv
Cfwd All Serv
Description
Specifies the shared call appearance line ID mapping. If Vertical First
is set, the first call makes the LED flash. If Horizontal first is set, the
second call makes the same LED flash.
7811 Cisco IP Phone does not support Line ID
Note
Mapping.
Default: Vertical First
Enables the SCA Barge-In.
Default: No
This parameter allows you to choose the number of calls per line button.
You can choose a value from 2 to 10.
Default: 2
Description
Enable/disable three-way conference service.
Default: Yes
Enable/disable attended-call-transfer service.
Default: Yes
Enable/disable blind-call-transfer service.
Default: Yes
Enable/disable do not disturb service.
Default: Yes
Enable/disable block-anonymous-call service.
Default: Yes
Enable/disable call-back service.
Default: Yes
Enable/disable blocking outbound Caller-ID service.
Default: Yes
Enable/disable call-forward-all service.
Default: Yes
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Web Page
153