Cisco 7800 Series Administration Manual page 193

Maintenance
•
•
•
•
•
•
Basic Reset
Performing a basic reset of a Cisco IP Phone provides a way to recover if the phone experiences an error and
provides a way to reset or restore various configuration and security settings.
The following table describes the ways to perform a basic reset. You can reset a phone with any of these
operations after the phone has started up. Choose the operation that is appropriate for your situation.
Table 13: Basic Reset Methods
Operation
Restart phone
Reset settings
Perform Factory Reset Phone Keypad
Use these steps to reset the phone to factory default settings using the phone keypad.
Basic Reset, page 179
Voice Quality Monitoring, page 180
Cisco IP Phone Cleaning, page 182
View Phone Information, page 182
Reboot Reasons, page 182
Phone Behavior During Times of Network Congestion, page 183
Action
Press Applicationsand choose
Admin Settings>Cold Reboot
To reset settings, press
Applicationsand choose Admin
Settings>Factory Reset
C H A P T E R
Explanation
Resets any user and network setup changes that
you have made, but that the phone has not
written to its Flash memory, to previously saved
settings, then restarts the phone.
Restores phone configuration or settings to
factory default.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
13
179