Cisco 7800 Series Administration Manual page 171

Parameter
LDAP Display Attrs
LDAP Number Mapping
Description
Format of LDAP results displayed on phone, where:
• a—Attribute name
• cn—Common name
• sn—Surname (last name)
• telephoneNumber—Phone number
• n—Display name
For example, n=Phone causes "Phone:" to be displayed in front of the
phone number of an LDAP query result when the detail soft button is
pressed.
• t—type
When t=p, that is, t is of type phone number, then the retrieved number
can be dialed. Only one number can be made dialable. If two numbers
are defined as dialable, only the first number is used. For example,
a=ipPhone, t=p; a=mobile, t=p;
This example results in only the IP Phone number being dialable and
the mobile number will be ignored.
• p—phone number
When p is assigned to a type attribute, example t=p, then the retrieved
number is dialable by the phone.
For example,
a=givenName,n=firstname;a=sn,n=lastname;a=cn,n=cn;a=telephoneNumber,n=tele,t=p
Default: Blank
Can be blank if not needed.
With the LDAP number mapping you can manipulate the
Note
number that was retrieved from the LDAP server. For example,
you can append 9 to the number if your dial plan requires a
user to enter 9 before dialing. Add the 9 prefix by adding
(<:9xx.>) to the LDAP Number Mapping field. For example,
555 1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a user can use the
Edit Dial feature to edit the number before dialing out.
Default: Blank
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Web Page
157