Cisco 7800 Series Administration Manual page 118

Feature Buttons and Softkeys
Feature
Speed Dial
SSH Access
Time-of-Day Routing
Time Zone Update
Transfer
Direct Transfer
UCR 2008
Voice Message System
Web Access Disabled by Default
Feature Buttons and Softkeys
The following table provides information about features that are available on softkeys, features that are
available on dedicated feature buttons, and features that you need to configure as programmable feature
buttons. An "X" in the table indicates that the feature is supported for the corresponding button type or softkey.
Of the two button types and softkeys, only programmable feature buttons require configuration in Cisco IP
Phone administration.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
104
Description and More Information
Dials a specified number that has been previously stored.
Allows you to enable or disable the SSH Access setting.
Restricts access to specified telephony features by time period.
Updates the Cisco IP Phone with time zone changes.
Allows users to redirect connected calls from their phones to another number.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer
feature implementation on the Cisco IP Phone and you may need to configure the Join
and Direct Transfer Policy to disable join and direct transfer on the same line or possibly
across lines.
Transfer: The first invocation of Transfer will always initiate a new call by using the
same directory number, after putting the active call on hold.
Direct Transfer: This transfer joins two established calls (call is in hold or in connected
state) into one call and drops the feature initiator from the call. Direct Transfer does not
initiate a consultation call and does not put the active call on hold.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer
feature implementation on the Cisco IP Phone and you may need to configure the Join
and Direct Transfer Policy to disable join and direct transfer on the same line or possibly
across lines. See:
The Cisco IP Phones support Unified Capabilities Requirements (UCR) 2008 by providing
the following functions:
• Support for Federal Information Processing Standard (FIPS) 140-2
• Support for 80-bit SRTCP Tagging
Enables callers to leave messages if calls are unanswered.
Enhances security by disabling access to all web services, such as HTTP. Users can only
access web services if you enable web access.