Cisco 7800 Series Administration Manual page 40

Set Up the Phone From the Setup Menus
You can control the phone access by using fields in the Third-Part Call Control Phone Configuration
Note
Utility. The Settings Access field accepts these values:
• Enabled: Allows access to the Settings menu.
• Disabled: Prevents access to the Settings menu.
• Restricted: Allows access to the User Preferences menu and allows volume changes to be saved.
Prevents access to other options on the Settings menu.
If you cannot access an option on the Admin Settings menu, check the Settings Access field.
You can configure settings that are display-only on the phone in Third-Party Call Control system.
Procedure
Step 1
Press Applications
Step 2 Select Admin Settings.
Step 3
Enter password if required, then click Sign-In.
Step 4 Select Network Setup.
Note
Step 5 Perform one of these actions to display the desired menu:
• Use the navigation arrows to select the desired menu and then press Edit.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 6 To display a submenu, repeat step 5.
Step 7
To exit a menu, press Back .
Text and Menu Entry From the Phone
When you edit the value of an option setting, follow these guidelines:
• Use the arrows on the navigation pad to highlight the field that you wish to edit, then press Select in the
navigation pad to activate the field. After the field is activated, you can enter values.
• Use the keys on the keypad to enter numbers and letters.
• To enter letters by using the keypad, use a corresponding number key. Press the key one or more times
to display a particular letter. For example, press the 2 key once for "a," twice quickly for "b," and three
times quickly for "c." After you pause, the cursor automatically advances to allow you to enter the next
letter.
• Press the softkey
• Press Revert before pressing Apply to discard any changes that you made.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
26
.
For information about the Reset Settings menu, see
179.
if you make a mistake. This softkey deletes the character to the left of the cursor.
Maintenance, on page