Cisco 7800 Series Administration Manual page 107

Configure Voice Mail for each Extension
Procedure
Step 1
Click Admin Login > advanced > Voice > Extn.
Step 2 Under Call Feature Settings, enter the Voice Mail Server.
Step 3 (Optional) Enter the Voice Mail Subscribe Interval; the expiration time in seconds, of a subscription to a voice
mail server.
Step 4
Click Submit All Changes. The phone reboots.
Configure the Message Waiting Indicator
You can configure the Message Waiting Indicator for separate extensions on the phone. The Message Waiting
Indicator lights based on the presence of new voicemail messages in the mailbox.
You can enable the indicator at the top of your IP phone to light when voice mail is left, or display a seeing
message waiting notification.
Procedure
Step 1 Click Admin Login > advanced > Voice > Extn.
Step 2
Under Call Feature Settings in the Message Waiting , choose yes to enable.
Assign a Ring Tone to an Extension
Procedure
Step 1
Click Admin Login > advanced > Voice > Ext(n), where (n) is the number of an extension.
Step 2 Under Call Feature Settings, use the Default Ring (n) drop-down list box to specify one of the following:
• No Ring
• 1 through 9—Choose one of the available ring tones.
Step 3 Click Submit All Changes.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Assign a Ring Tone to an Extension
93