Cisco 7800 Series Administration Manual page 153

Parameter
Use Compact Header
Talk Package
Hold Package
Conference Package
RFC 2543 Call Hold
SIP TCP Port Min
SIP TCP Port Max
Caller ID Header
Display Diversion Info
Max INVITE Retry Attempts
Max NON-INVITE Retry Attempts
Description
If set to yes, the phone uses compact SIP headers in outbound SIP
messages. If inbound SIP requests contain normal headers, the phone
substitutes incoming headers with compact headers. If set to no, the
phones use normal SIP headers. If inbound SIP requests contain compact
headers, the phones reuse the same compact headers when generating
the response, regardless of this setting.
Default: No
Enables support for the BroadSoft Talk Package that lets users answer
or resume a call by clicking a button in an external application.
Default: No
Enables support for the BroadSoft Hold Package, which lets users place
a call on hold by clicking a button in an external application.
Default: No
Enables support for the BroadSoft Conference Package that enables
users to start a conference call by clicking a button in an external
application.
Default: No
If set to yes, unit includes c=0.0.0.0 syntax in SDP when sending a SIP
re-INVITE to the peer to hold the call. If set to no, unit will not include
the c=0.0.0.0 syntax in the SDP. The unit will always include a=sendonly
syntax in the SDP in either case.
Default: Yes
Specifies the lowest TCP port number that can be used for SIP sessions.
Default: 5060
Specifies the highest TCP port number that can be used for SIP sessions.
Default: 5080
Provides the option to take the caller ID from PAID-RPID-FROM,
PAID-FROM, RPID-PAID-FROM, RPID-FROM, or FROM header.
Default: PAID-RPID-FROM
Display the Diversion info included in SIP message on LCD or not.
Maximum number of INVITE retry attempts by the phone.
Default: 6
Maximum number of NON-INVITE retry attempts by the phone.
Default: 6
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Cisco IP Phone Web Page
139