Cisco 7800 Series Administration Manual page 109

Procedure
Step 1
Press Applications
Step 2 Select Admin Settings > Enable Web Server.
Step 3
Select Edit.
Step 4 Press y/n to toggle the selection to Yes and enable.
Step 5 Click OK > Save.
Enable Access to Phone Web Interface
Procedure
Step 1 Click Admin Login > advanced > Voice > System.
Step 2 Under the System Configuration section, choose Yes from the Enable Web Server drop-down list box.
Step 3
In the Web Server Port field, enter the port to access the web server. The default is port 80.
Step 4 In the Enable Web Admin Access drop-down list box, you can enable or disable local access to the Admin
Login of the phone web user interface. Defaults to Yes (enabled).
Step 5
In the Admin Password field, enter a password if you want the system administrator to log in to the phone
web user interface with a password. The password prompt appears when an administrator clicks Admin Login.
The minimum password length can be 4 characters or the maximum password length is 127 characters.
Note Password can contain any character
except:
Step 6 In the User Password field, enter a password if you want users to log in to the phone web user interface with
a password. The password prompt appears when users click User Login. The minimum password length can
be 4 characters or the maximum password length is 127 characters.
Note Password can contain any character
except:
Step 7 Click Submit All Changes.
.
• Space key
• 13 stars (*************)
• Space key
• 13 stars (*************)
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Phone Web Server
95