Cisco 7800 Series Administration Manual page 117

Feature
Redial
Reroute Direct Calls to Remote
Destination to Enterprise Number
Ringtone Setting
RTCP Hold For SIP
Secure Conference
Services URL button
Serviceability for SIP Endpoints
Shared Line
Show Calling ID and Calling Number
Show Duration for Call History
Description and More Information
Allows users to call the most recently dialed phone number by pressing a button or the
Redial softkey.
Reroutes a direct call to a user's mobile phone to the enterprise number (desk phone).
For an incoming call to remote destination (mobile phone), only remote destination rings;
desk phone does not ring. When the call is answered on their mobile phone, the desk
phone displays a Remote In Use message. During these calls, users can make use of
various features of their mobile phone.
Identifies ring type used for a line when a phone has another active call.
Ensures that held calls are not dropped by the gateway. The gateway checks the status
of the RTCP port to determine if a call is active or not. By keeping the phone port open,
the gateway will not end held calls.
Allows secure phones to place conference calls using a secured conference bridge. As
new participants are added by using Confrn, Join, cBarge softkeys or MeetMe
conferencing, the secure call icon displays as long as all participants use secure phones.
The Conference List displays the security level of each conference participant. Initiators
can remove nonsecure participants from the Conference List. Noninitiators can add or
remove conference participants if the Advanced Adhoc Conference Enabled parameter
is set.
Allows users to access services from a programmable button rather than by using the
Services menu on a phone.
Enables administrators to quickly and easily gather debug information from phones.
This feature uses SSH to remotely access each IP phone. SSH must be enabled on each
phone for this feature to function.
Allows a user with multiple phones to share the same phone number or allows a user to
share a phone number with a coworker.
The phones can display both the calling ID and calling number for incoming calls. The
IP phone LCD display size limits the length of the calling ID and the calling number that
display.
The Show Calling ID and Calling Number feature applies to the incoming call alert only
and does not change the function of the Call Forward and Hunt Group features.
See "Caller ID" in this table.
Displays the time duration of placed and received calls in the Call History details.
If the duration is greater than or equal to one hour, the time is displayed in the Hour,
Minute, Second (HH:MM:SS) format.
If the duration is less than one hour, the time is displayed in the Minute, Second (MM:SS)
format.
If the duration is less than one minute, the time is displayed in the Second (SS) format.
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
Telephony Features for Cisco IP Phone
103