Cisco 7800 Series Administration Manual page 63

Digit Sequence
! (exclamation point)
*xx
S0 or L0
P
Digit Sequence Examples
The following examples show digit sequences that you can enter in a dial plan.
In a complete dial plan entry, sequences are separated by a pipe character (|), and the entire set of sequences
is enclosed within parentheses:
( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
• Extensions on your system:
( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
[1-8]xx
four-digit extensions, enter the following string:
• Local dialing with seven-digit number:
( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]111)
9, xxxxxxx
number, as in a local call.
• Local dialing with 3-digit area code and a 7-digit local number:
( [1-8]xx | 9, xxxxxxx | 9, <:1>[2-9]xxxxxxxxx | 8, <:1212>xxxxxxx | 9, 1 [2-9] xxxxxxxxx
| 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 )
9, <:1>[2-9]xxxxxxxxx
9, an external dial tone sounds. The user must enter a 10-digit number that begins with a digit 2 through
9. The system automatically inserts the 1 prefix before it transmits the number to the carrier.
Function
Prohibits a dial sequence pattern. For example:
1900xxxxxxx!
Rejects any 11-digit sequence that begins with 1900.
Allows a user to enter a 2-digit star code.
For Interdigit Timer Master Override, enter
interdigit timer to 0 seconds, or enter
timer to 0 seconds.
To pause, enter
feature is typically used for implementation of a hotline and warm
line, with a 0 delay for the hot line, and a nonzero delay for a warm
line. For example:
P5
A pause of 5 seconds is introduced.
Allows a user dial any three-digit number that starts with the digits 1 to 8. If your system uses
After a user presses 9, an external dial tone sounds. The user can enter any seven-digit
This example is useful where a local area code is required. After a user presses
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
to reduce the long interdigit
L0
, the number of seconds to pause, and a space. This
P
[1-8]xxx
Dial Plan
to reduce the short
S0
49