Cisco 7800 Series Administration Manual page 152

Cisco IP Phone Web Page
Inventory Settings
Parameter
Asset ID
SIP
SIP Parameters
Parameter
Max Forward
Max Redirection
SIP User Agent Name
SIP Server Name
SIP Reg User Agent Name
SIP Accept Language
Cisco IP Phone 7800 Series for Third-Party Call Control Administration Guide
138
Description
Provides the ability to enter an asset ID for inventory management when
using LLDP-MED. The default value for Asset ID is empty. Enter a
string of less than 32 characters if you are using this field.
The Asset ID can be provisioned only by using the web management
interface or remote provisioning. The Asset ID is not displayed on the
phone screen.
Changing the Asset ID field causes the phone to reboot.
Description
SIP Max Forward value, which can range from 1 to 255.
Default: 70
Number of times an invite can be redirected to avoid an infinite loop.
Default: 5
Used in outbound REGISTER requests.
Default: $VERSION
If empty, the header is not included. Macro expansion of $A to $D
corresponding to GPP_A to GPP_D allowed
Server header used in responses to inbound responses.
Default: $VERSION
User-Agent name to be used in a REGISTER request. If this is not
specified, the <SIP User Agent Name> is also used for the REGISTER
request.
Default: Blank
Accept-Language header used. To access, click the SIP tab, and fill in
the SIP Accept Language field.
There is no default. If empty, the header is not included.