Power Steering Hose, Line, And Pressure Switch Replacement - Honda Accord 2008 Manual

07/11/02 09:19:11 61TA0000_170_0016

Power Steering Hose, Line, and Pressure Switch Replacement

Note these items during installation:
• Connect each hose to the corresponding line securely until it contacts the stop on the line. Install the clamp or
adjustable clamp at the specified distance from the hose end as shown.
• Check all clamps for deterioration or deformation; replace the clamps with new ones if necessary.
• Add the recommended power steering fluid to the specified level on the reservoir and check for leaks.
＊０１
＊０２
RETURN HOSE
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
ＴＡ０８ＡＥ４Ｆ２４５０００４７０１１ＫＢＡＴ１０
ADJUSTABLE HOSE CLAMP (A)
2.5 5.5 mm −
(0.10 0.22 in.) −
POWER STEERING
PRESSURE SWITCH
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
6 x 1.0 mm
11 N·m
(1.1 kgf·m, 8.0 lbf·ft)
B
B
A
A
PUMP INLET HOSE
A
RETURN LINE
−
2.0 4.0 mm
−
(0.08 0.16 in.)
6 x 1.0 mm
9.8 N·m
INLET LINE
(1.0 kgf·m, 7.2 lbf·ft)
PUMP OUTLET HOSE
CYLINDER LINES
26 N·m
(2.7 kgf·m, 20 lbf·ft)
18 x 1.5 mm
47 N·m
(4.8 kgf·m, 35 lbf·ft)
HOSE CLAMP (B)
2.5 5.5 mm −
(0.10 0.22 in.) −
RETURN LINE
16 x 1.5 mm
28 N·m (2.9 kgf·m, 21 lbf·ft)
17 N·m
(1.7 kgf·m, 12 lbf·ft)
17-15