Internal Error Codes - Cisco 8800 Series Manual

Internal Error Codes

Parameter Name
ERR
UIDn
EMS
MUID
MPWD
Internal Error Codes
The phone defines a number of internal error codes (X00–X99) to facilitate configuration in providing finer
control over the behavior of the unit under certain error conditions.
Parameter Name
X00
X20
X40
X60
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
76
Description and Default Value
Result message of resync or upgrade attempt. Only
useful in generating result syslog messages. The value
is preserved in the UPGERR variable in the case of
upgrade attempts.
The contents of the Line n UserID configuration
parameter.
Extension Mobility Status
Extension Mobility User ID
Extension Mobility Password
Description and Default Value
Transport layer (or ICMP) error when sending a SIP
request.
SIP request times out while waiting for a response.
General SIP protocol error (for example, unacceptable
codec in SDP in 200 and ACK messages, or times out
while waiting for ACK).
Dialed number invalid according to given dial plan.
Cisco IP Phone Provisioning