Cisco 8800 Series Manual page 33

New and Changed Information
Revisions
Added a new task on how to enable early media
support
Added topics replacing the "Set up Profile Account"
topic to support the enhancements in profile
authentication
Added new fields and topics to support the feature of
DND and call forwarding status sync
Added a new topic replacing the existing Busy Lamp
Field Configuration on a Monitoring Phone.
Added a new task on how to phone users to configure
speed dial and monitor a coworker's line.
Added a new topic about including a device identifier
in uploaded syslog messages.
Added new fields and a new task on how to remotely
report phone problems.
Added the Syslog Identifier field.
Replaced the Profile Account Enable parameter with
the Profile Authentication Type field
Updated the description of the Profile Rule parameter.
Updated Report Rule and added new parameters:
Report to Server, periodic Upload to Server, and
Upload Delay on Local Change.
Updated the description for the Extension field.
Updated the description of the First Name Filter and
Last Name Filter fields.
Example XML parameter configuration is added for
the Line Enable parameter.
Added a new task on how to assign the new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
New and Changed for Firmware Release 11.2(3)
New and Changed Sections
Enble _Early-Media Support
Profile Authentication
Specify the Profile Authentication Type
DND and Call Forwarding Status Sync
Enable Feature Key Sync
Enable Call Forwarding Status Sync via XSI Service,
Enable DND Status Sync via XSI Service
XSI Line Service
Phone Configuration for Monitoring Other Phones
Enable Users to Configure Features on Line Keys
Include a Device Identifier in Uploaded Syslog
Messages
Report a Phone Problem Remotely
PRT Status
Optional Network Configuration
Configuration Profile
Upload Cofiguration Options
Line Key
LDAP Directory Paramters
Voice>Ext(n)>General
Allocate a Key Expansion Module Type
Allocate a Key Expansion Module Type with the
Phone Menu
13