Cisco 8800 Series Manual page 243

Cisco IP Phone Configuration
b = Blink with a Color
This is equivalent to the system default of Slow Blink.
n = No Blink, Solid Color
Note
The table below describes three sample custom LED behavior settings.
Table 38: Sample LED Configurations
LED
Solid Red
Blinking Amber
OFF
Each of the following features has LED behavior settings. The tables that follow describe the LED behavior
for each feature.
• Basic Line feature (has the same behaviors as Bluetooth Hands-Free Line)
• Bluetooth Hands-Free Line feature (has the same behaviors as Basic Line)
• Shared Line feature
The following table describes the LED behavior for both the Basic Line and Bluetooth Hands-Free features.
The table compares the Default and Preset 1 settings.
Table 39: Basic Line Key and Bluetooth Hands-Free
Field and Description
Local Progressing LED—Line is sending outgoing call
and the remote end is ringing.
Local Held LED—Local user put the line on hold.
Local Active LED—Line is in a connected call.
Local Seized LED—Line is going off-hook.
Local Ringing LED—Line is ringing on incoming call.
The following table describes the LED behavior for the Shared Line feature. The table compares the Default
and Preset 1 settings.
PATTERN (p)
If you misconfigure any field, the system applies the system Default settings
to that field.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
User Input
c=r;p=n
c=r
c=a;p=b
c=o
Default Pattern and
Color
Solid red
Slow blink red
Solid red
Solid red
Fast blink red
Line Key LED Behavior Customization
Preset 1 Pattern and
Color
Solid green
Blinking green
Solid green
Solid green
Blinking amber
223