Cisco Ip Phone Installation; Verify The Network Setup - Cisco 8800 Series Manual

Cisco IP Phone Installation

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Verify the Network Setup

For the phone to operate successfully as an endpoint in your network, your network must meet specific
requirements.
Procedure
Step 1
Configure a VoIP Network to meet the following requirements:
• VoIP is configured on your routers and gateways.
Step 2 Set up the network to support one of the following:
• DHCP support
Verify the Network Setup, on page 311
Install the Cisco IP Phone, on page 312
Configure the Network from the Phone, on page 313
Set Up Wireless LAN from the Phone, on page 320
Verify Phone Startup, on page 325
Configure Internet Connection Type, on page 325
Configure VLAN Settings, on page 326
Set Up a Wi-Fi Profile from the Phone, on page 330
Set Up a Wi-Fi Profile , on page 332
Delete a Wi-Fi Profile, on page 336
Change the Order of a Wi-Fi Profile , on page 336
Scan and Save a Wi-Fi Network, on page 337
SIP Configuration, on page 339
NAT Transversal with Phones, on page 384
Dial Plan, on page 393
Regional Parameters Configuration, on page 400
Cisco IP Phone 8800 Series Documentation, on page 416
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
17
C H A P T E R
311