Configure The Acoustic Settings - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
Bluetooth Volume
Electronic
Hookswitch Control

Configure the Acoustic Settings

You can configure the audio settings for the phone speaker, the handset, and the connected headsets.
You can also configure the parameters in the phone configuration file with XML (cfg.xml) code. To configure
each parameter, see the syntax of the string in
Before you begin
Access the Phone Web Interface, on page
Procedure
Step 1 Select Voice > User.
Step 2
In the Acoustic Settings area, set the acoustics as described in
Step 3 Click Submit All Changes.
Description
Sets the default volume for the Bluetooth device.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Bluetooth_Volume ua="rw">9</Bluetooth_Volume>
• In the phone web page, enter a valid value as the Bluetooth volume.
Allowed values: an integer ranging between 0 and 15
Default: 9
Enables or disables the Electronic HookSwitch (EHS) feature. After EHS is enabled,
the AUX port does not output phone logs.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Ehook_Enable ua="na">Yes</Ehook_Enable>
• In the phone web page, enter a valid value as the EHS volume.
Allowed values: Yes|No
Default: No
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for Acoustic Settings, on page
104.
Parameters for Acoustic Settings, on page 276
Configure the Acoustic Settings
276.
275