Enable Conference Button With A Star Code - Cisco 8800 Series Manual

Cisco IP Phone Configuration
Parameter
Extended Function

Enable Conference Button with a Star Code

You can add a star code to the Conference button so that your user can press the button only once to add many
active calls to a conference. You can enable this feature from the phone web page.
Before you begin
• The phone server must suppport this feature.
• Access the phone administration web page. See
Procedure
Step 1 Select Voice > Ext(n), where n is an extension number.
Step 2 In the Call Features Settings section, configure the Conference Single Hardkey and Conference Bridge
URL fields as definined in
You can also enable the conference button with a xml file. Enter a string in this format:
<Conference_Bridge_URL_1_ ua="na">*55</Conference_Bridge_URL_1_>
Description and default value
This field functions only on the line keys with the Extension field set to Disabled.
Use the following syntax to configure a line key with the BLF, speed dial, and call
pickup features:
• Busy Lamp Field (BLF)
Example:
fnc=blf;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Call Pickup
Example:
fnc=blf+cp;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Speed Dial
Example:
fnc=blf+sd;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Speed Dial and Call Pickup
Example:
fnc=blf+sd+cp;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Extended_Function_1_>fnc=blf;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY</Extended_Function_1_>
• In the phone web interface, configure the field with a valid syntax to enable
monitoring another user or extension using the line key.
Default: Empty
Conference Button Parameters, on page
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Enable Conference Button with a Star Code
Access the Phone Web Interface, on page
156.
104.
155