Enable Call Forwarding Status Sync Via Xsi Service - Cisco 8800 Series Manual

Enable Call Forwarding Status Sync via XSI Service

Feature Key Sync
Yes
No
No
No
No
If a line key is configured with FKS or XSI synchronization and is also enabled with DND or call forwarding,
the respective DND
key has a missed call, a voice message, or an urgent voicemail alert, the DND icon or the call forwarding icon
is also displayed with the alert notification.
Related Topics
Enable Call Forwarding Status Sync via XSI Service
When call forwarding sync is enabled, the settings related to call forwarding on the server are synchronized
to the phone. The changes in call forwarding settings made on the phone will also be synchronized to the
server.
Note If XSI sync for call forwarding is enabled and the XSI host server or XSI account is not configured correctly,
the phone user can't forward calls on the phone.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code.
Before you begin
• Access the phone administration web page. See
• Configure the XSI host server and the corresponding credentials on the Voice > Ext (n) tab.
• Disable Feature Key Sync (FKS) in Call Feature Settings section from Voice > Ext (n) .
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
208
DND Enabled
No
Yes
No
Yes
No
icon or the call forwarding
Enable Feature Key Sync, on page 206
Enable Call Forwarding Status Sync via XSI
Enable DND Status Sync via XSI
• When using Login Credentials for XSI server authentication, enter XSI Host Server, Login User
ID, and Login Password in the XSI Line Service section.
• When using SIP Credentials for XSI server authentication, enter XSI Host Server and Login User
ID in the XSI Line Service section, and Auth ID and Password in the Subscriber Information
section.
CFWD Enabled DND Sync
No Yes (SIP)
Yes Yes (HTTP)
Yes No
No Yes (HTTP)
No No
icon is displayed next to the line key label. If the line
Service, on page 208
Service, on page 209
Access the Phone Web Interface, on page
Cisco IP Phone Configuration
CFWD Sync
Yes (SIP)
Yes (HTTP)
Yes (HTTP)
No
No
104.