User Access Attribute; Access The Phone Web Interface - Cisco 8800 Series Manual

User Access Attribute

The administrator account can view and modify all web profile parameters, including web parameters, that
are available to the user login. The Cisco IP Phone system administrator can further restrict the parameters
that a user account can view and modify through use of a provisioning profile.
Configuration parameters that are available to the user account are configurable on the Cisco IP Phone. User
access to the phone web user interface can be disabled.
User Access Attribute
The user access (ua) attribute controls may be used to change access by the User account. If the ua attribute
is not specified, the existing user access setting is retained. This attribute does not affect access by the Admin
account.
The ua attribute, if present, must have one of the following values:
• na—No access
• ro—Read-only
• rw—Read and write
• y—Preserve value
The following example illustrates the ua attribute. Notice in the last line that the ua attribute is updated to
rw, and the station name field (Travel Agent 1) is preserved. If y is not included, Travel Agent 1 is overwritten:
<flat-profile>
<SIP_TOS_DiffServ_Value_1_ ua="na"/>
<Dial_Plan_1_ ua="ro"/>
<Dial_Plan_2_ ua="rw"/>
<Station_Name ua="rw" preserve-value="y">Travel Agent 1</Station_Name></flat-profile>
Double quotes must enclose the value of the ua option.

Access the Phone Web Interface

The phone firmware provides mechanisms for restricting end-user access to some parameters. The firmware
provides specific privileges for sign-in to an Admin account or a User account. Each can be independently
password-protected.
• Admin account–Allows the full access to all administration web server parameters
• User account–Allows the access to a subset of the administration web server parameters
If your service provider has disabled access to the configuration utility, contact the service provider before
proceeding.
Procedure
Step 1 Ensure that the computer can communicate with the phone. No VPN in use.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
104
The y value must be used together with na, ro, or rw.
Cisco IP Phone Configuration