Buttons And Hardware - Cisco 8800 Series Manual

Cisco IP Phone 8800 Series Multiplatform Phone Hardware
4
5
6
Note Each USB port supports the connection of up to five supported and nonsupported devices. Each device
connected to the phone is included in the maximum device count. For example, your phone can support five
USB devices (such as three key expansion modules, one hub, and one other standard USB device) on the side
port and five additional standard USB devices on the back port. Many third-party USB products count as
multiple USB devices, for example, a device containing USB hub and headset can count as two USB devices.
For more information, see the USB device documentation.

Buttons and Hardware

The Cisco IP Phone 8800 Series has two distinct hardware types:
• Cisco IP Phones 8811, 8841, 8851, and 8861—do not have a camera.
• Cisco IP Phones 8845 and 8865—have a built-in camera.
Figure 1: Cisco IP Phone 8845 Buttons and Hardware
1
2
Network port (10/100/1000 SW) connection.
IEEE 802.3at power enabled.
Access port (10/100/1000 PC) connection.
Auxiliary port.
Handset and Handset light strip
Camera
Cisco IP Phone 8845 and 8865
only
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
10 Audio In/Out ports
11 USB port
Indicates whether you have an incoming call (flashing red) or a
new voice message (steady red).
Use the camera for video calls.
Buttons and Hardware
7