Cisco 8800 Series Manual page 348

VLAN Settings Parameters
Parameter Name
VLAN ID
PC Port VLAN ID
Enable CDP
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
328
Description and Default Value
If you use a VLAN without CDP (VLAN enabled and
CDP disabled), enter a VLAN ID for the IP phone.
Note that only voice packets are tagged with the
VLAN ID. Do not use 1 for the VLAN ID.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<VLAN_ID ua="rw">1</VLAN_ID>
• In the phone web interface, enter an appropriate
value.
Valid values: An integer ranging from 0 through 4095
Default: 1
Allows you to enter a VLAN ID for the PC port.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<PC_Port_VLAN_ID
ua="na">1</PC_Port_VLAN_ID>
• In the phone web interface, enter an appropriate
value.
Valid values: An integer ranging from 0 through 4095
Default: 1
Enable CDP only if you are using a switch that has
Cisco Discovery Protocol. CDP is negotiation based
and determines which VLAN the IP phone resides in.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Enable_CDP ua="na">Yes</Enable_CDP>
• In the phone web page: set to Yes to enable CDP.
Valid values: Yes/No
Default: Yes
Cisco IP Phone Installation