Parameters For Xml Applications - Cisco 8800 Series Manual

Parameters for XML Applications

Procedure
Step 1
Select Voice > Phone.
Step 2 In the XML Service section, configure the XML Application Service Name and XML Application Service
URL fields as defined in
Step 3 (Optional) Specify the username and password to authenticate XML service in the XML User Name and
XML Password fields as defined in
Step 4 (Optional) Enable and configure authentication for CGI/Execute URL via Post from an external application
(for example, a web application) to the phones.
Configure the CISCO XML EXE Enable and CISCO XML EXE Auth Mode fields as defined in
for XML Applications, on page
Step 5 Click Submit All Changes.
Parameters for XML Applications
The following table defines the function and usage of the XML application parameters in the XML Service
section under the Voice > Phone tab in the phone web interface. It also defines the syntax of the string that
is added in the phone configuration file (cfg.xml) with XML code to configure a parameter.
Table 21: Parameters for XML Applications
Parameter
XML Application
Service Name
XML Application
Service URL
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
166
Parameters for XML Applications, on page
Parameters for XML Applications, on page
166.
Description
Name of the XML application. The name displays on the phone as a web application
choice.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<XML_Application_Service_Name
ua="na">XML_APP</XML_Application_Service_Name>
• In the phone web interface, enter a name for the XML application.
Default: Empty
The URL where the XML application is located.
Macro variables are supported in XML URLs. For the valid macro variables, see
Variables, on page 168.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<XML_Application_Service_URL
ua="na">XML_APP</XML_Application_Service_URL>
• In the phone web interface, enter the URL for the XML application.
Default: Empty
Cisco IP Phone Configuration
166.
166.
Parameters
Macro