Cisco 8800 Series Manual page 210

Parameters for TR-069 Configuration
Parameter
CWMP V1.2 Support
TR-069 VoiceObject Init
TR-069 DHCPOption Init
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
190
Description
Settings that enables or disables CPE WAN Management Protocol
(CWMP) support. If set to disable, the phone does not send any Inform
messages to the ACS nor accept any connection requests from the ACS.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<CWMP_V1.2_Support ua="na">Yes</CWMP_V1.2_Support>
• In the phone web page, select Yes to enable this feature and select
No to disable it.
Valid values: Yes|No
Default: Yes
Settings to modify voice objects.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<TR-069_VoiceObject_Init
ua="na">Yes</TR-069_VoiceObject_Init>
• In the phone web page, select Yes to initialize all voice objects to
factory default values or select No to retain the current values.
Valid values: Yes|No
Default: Yes
Settings to modify DHCP settings.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<TR-069_DHCPOption_Init
ua="na">Yes</TR-069_DHCPOption_Init>
• In the phone web page, select Yes to initialize the DHCP settings
from the ACS or select No to retain the current DHCP settings.
Valid values: Yes|No
Default: Yes
Cisco IP Phone Configuration